Read this manual carefully before installation of the heater!
Dear customer,
MORA-TOP s. r. o. would like to thank you for deciding to use a product from made by our brand.
By means of this manual we will familiarise you with the use, positioning, construction, maintenance and other
information about the pressurised storage water heaters. The reliability and safety of the product is confirmed
by tests performed by the Engineering Test Institute in Brno, certificate number B-30-00732-02 and also ITI
TÜV, certificate number 35/03/07/02/0.
We hope that our product will serve to your complete satisfaction.
1.
Description of functions
.
.
.
.
.
.
2
2.
Information for the consumer .
.
.
.
.
.
3
3.
Technical description .
.
.
.
.
.
.
3
4.
Operational activity
.
.
.
.
.
.
.
5
5.
Operation
.
.
.
.
.
.
.
.
5
6.
Mounting on a wall
.
.
.
.
.
.
.
7
7.
Plumbing installation .
.
.
.
.
.
.
7
8.
Connection of a combined heater to the heating system .
.
7
9.
Electrical installation
.
.
.
.
.
.
.
9
10.
Setting the heater into operation.
.
.
.
.
10
11.
Cleaning the heater and replacement of the anode bar. .
.
.
10
12.
Important notice
.
.
.
.
.
.
.
10
13.
Fire regulations .
.
.
.
.
.
.
11
14.
Installation regulations .
.
.
.
.
.
.
11
15.
Most frequent functional defects and their causes.
.
.
.
11
16.
Product accessories
.
.
.
.
.
.
.
12
Illustrations
.
.
.
.
.
.
.
.
12
Table of technical data
.
.
.
.
.
.
13
Heater dimensions
.
.
.
.
.
.
.
14
Type of environment:
We recommend use of the product in an internal environment with air temperature +2°C to 45°C and
relative humidity of max. 80%.
Positioning:
The heater is positioned on the floor next to the source of heating water or in its close vicinity. All
connection pipes are to be neatly fitted with thermal insulation.
1.
DESCRIPTION OF FUNCTION
Indirect heating stationary heaters from the NTR and NTRR ranges are used for preparation of hot utility water
in connection with another source of heating water, most frequently a gas boiler. In the case of NTRR types
heating is ensured via a combination of two sources of heating water (gas solar system or heat pump).
The nominal outlet ensures sufficient amounts of hot utility water even for large flats, business premises,
restaurants and similar facilities
In the event of increased consumption of hot utility water, the storage
heaters additionally heat water continuously and work in a similar manner to a flow heater.
The producer reserves the right to make technical changes to the product.
The product is intended for permanent contact with drinking water.
