Mopedia RP893, Инструкция по эксплуатации

Страница: 17 / 36

5
ENGLISH
7. GENERAL DESCRIPTION
Ensure greater toughness at each end is looped with three attachment points. with belt with
Velcro for greater support when lifting the patient from a sitting to standing position.
Also available model with pelvic traction for more help in lifting (REF. RP896).
Sling for stand up lifter. Made in 100% polyester fabric (air mesh), strong and breathable, sewn
with polyester thread. The border is made by a strong ribbon 100% polypropylene.
The ribbon for the border is continuous and sewn around the entire perimeter of the sling to
ensure greater toughness, at each end is looped with three attachment points. Equipped with
belt with Velcro for greater support when lifting the patient from a sitting to standing position.
Available also a model with pelvic traction for more help during lifting (model REF. RP896).
1
2
4
3
REF. RP893-RP893XL
1. Loops
2. Velcro
3. Padded shoulder rest
4. Belt
1
2
6
4
3
5
REF. RP896
1. Loops
2. Velcro
3. Padded shoulder rest
4. Belt
5. Belt for pelvic traction
6. Loops
8. BEFORE USE
Always verify the sling is in perfect condition, carefully check the seams and the loops.
9. WARNING FOR CORRECT USE
- Before use, make sure the device is not damaged: the tissue, the border, the sewing and
suspension loops must be intact
- Periodically check for any damage or usury, every 6 month at least, in particular if you often
clean the sling
- Ensure the loops are correctly hooked to the cradle
- Store and use away from flame or source of heat
- Do not exceed the maximum load