www.m o p e c .c o m
(800) 362- 8491
info @ m o p e c .c o m
Touch-Screen Setup / Troubleshooting
1. To access Maestro setup and troubleshooting through the
touch screen hit the "settings" icon in the top left corner.
2. Enter Pass code 1234
3. Once the configure Tab is shown, now you have access to
configure parameters for air quality, alarm threshold, and zero
out the lift.
4. To test your settings before saving you can hit the "Back"
button in the top left corner and run the function that was
adjusted. If the settings meet your requirements then go back
to the configure tab("Settings" icon in the top left corner). Save
the configuration and Exit / Re-lock.
To access the configuration tab again you must re-enter the
pass code.
NOTE: Factory and Diagnostics Tabs can be accessed by
Mopec Maestro trained personnel. Contact Mopec for support.
