Update Vehicle Configuration
1.Vehicle Vin must be updated with the sales code of the added accessory in order to enable system
functionality. Using the DealerCONNECT website and a StarMobile diagnostic tool, complete the
following procedure:
a. Log on to https://dealerconnect.chrysler.com
TOOLS REQUIRED
13mm 10mm 1/4”
T-20
KIT CONTENTS
1 X
2 X
12X
2 X
1 X
1 X
2 X
1 X
OVERVIEW
This instructional manual will discuss the installation of the hood switch harness & XBM (Remote
Start) turn-on. Other steps will include replacement procedure of the WIN, antenna installation, hood
switch installation, and uploading of vehicle configuration from Dealer Connect. Refer to the vehicle
Service Manual for specific installation procedures for all components except the hood switch har-
ness, which is covered here in detail.
3 of 17
1 X
1 X
VEHICLE PREPARATION
1. Lower one or more of the passenger windows so the keys do not get locked in the vehicle.
2. Disconnect and isolate the negative battery cable. The battery will need to be re-connected before
programming.
3. Disassemble and remove keys from old transmitters, install into provided new
transmitters.
StarMobile Cable CH9404D
