1 4
Dash reassembly.
A. Reverse the dash dissassembly procedure.
Reassembly
Component mounting.
A. Mount security module to existing underdash braces or wire harnesses
using the supplied wire ties. Avoid moving parts (steering column, brake
pedal assembly).
B. Using supplied wire ties, secure the security module harness to existing
wire harnesses under the left side of the dash. Ensure no wires will become
entangled in the steering column knuckle and that they are not visible to
vehicle occupants.
C. Using a supplied wire tie, secure the programming/override button to the
harness leading to the vehicle’s diagnostic connector.
Consistency in mounting this switch in the same place
every time will make it easier to find in case the system
comes back for service. Also, the dash will not have to
be disassembled to access it.
Ensure that the place-
ment of the programming/override button is indicated
in the Owner’s manual and the customer knows where
it is located and can access it..
SECURITY SYSTEM ARM / DISARM
USING FACTORY RKE KEYFOBS
VERIFY INTERIOR DOOR TRIM UNLOCK SWITCH DOES NOT DISARM SYSTEM
ALL ENTRY POINTS TRIP ALARM CYCLE
STATUS INDICATOR FLASHES WHEN ARMED
SHOCK SENSOR SETTINGS (LITE-TOUCH & FULL SHOCK)
Security Function Checklist
PROGAMMING/OVERRIDE BUTTON DISARMS SYSTEM WITH IGNITION ON
