manualshive.com logo in svg

MOOSE Z900, Руководство пользователя

Поделиться
Скачать
MOOSE Z900 Скачать руководство пользователя страница 29

 

 

 

 
 

1.7 Fire Detection

 

 
Your system may or may not include fire detection, depending upon the options 
purchased and the local codes and regulations for your area. Fire alarm systems 
are active 24 hours a day and cannot be turned off. All fire systems require regular 
testing and maintenance. Common household dust build-up in smoke detectors 
can cause them to false alarm or fail in a time of need. Consult your security 
company representative for a scheduled maintenance program. 
 

What To Do If The Fire Alarm Sounds

 

 

1. 

The red ALARM indicator will light, and the alarm sounder will sound 
steadily. The ZONE indicator(s) corresponding to the violated Fire 
Zone(s) will also be lighted. If the alarm was activated manually 
through the keypad panic zone, no ZONE indicators will be lit. 

 
2.       Press the 

Reset (*)

 key to silence the keypad and the audible alarm. 

 
3. 

Notify the alarm monitoring service or the proper authorities immedi- 
ately if the alarm was unintentional. 

 
4. 

The red ALARM  light will remain on. To clear the alarm, enter a  
valid User Code. 

 

WARNING 

 

IF THE TROUBLE INDICATOR LIGHTS, A FIRE SUPERVISORY /TROUBLE 
CONDITION MAY EXIST. CONSULT YOUR SECURITY COMPANY 
REPRESENTATIVE. 

 
 
 
 
 
 
 
 
 
 
 

 

Содержание Z900




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды