MOOSE Z900, Руководство пользователя

Страница: 19 / 51

Bypassing Zones
The Bypass (#) key is used to bypass selected zones in your system. A bypassed
zone will NOT be capable of activating an alarm as it is temporarily removed from
your system. Bypassing (also referred to as shunting) is most commonly used to
allow free movement of an area (zone or group of zones) while arming the rest of the
system or to temporarily remove a zone or zones that require service, allowing partial
use of the system until repaired. When a zone is bypassed, its corresponding Zone
indicator will flash to indicate that is has been removed from operation. It may
continue to flash until 30 seconds after the system is armed or it may flash for entire
time that the system is armed. The installer can program how the flashing operates.
WARNING
WHEN ZONES ARE BYPASSED, SECURITY IS COMPROMISED. DO NOT
INSTRUCT TEMPORARY USERS ON USE OF THE BYPASS FEATURE.
To Bypass A Zone
1. The system must be disarmed.
2. Press the
Bypass (#) key, then enter the number of the zone to
be bypassed.
3.
The corresponding ZONE indicators will blink to indicate the
zones that have been bypassed. The blinking will cease after
the system is armed and the exit delay has expired. If
Perma-
nent Force-Arming has been enabled, then the ZONE indica
tors for the bypassed zones will continue to blink during the
ARMED period.
4.
Repeat steps 2 and 3 to bypass other zones.
To Cancel A Zone Bypass
1. The system must be disarmed.
2.
Press the Bypass (#) key followed by the number of the zone to
be resto red to service.
3.
The ZONE indicator of the previously bypassed zone will stop
blinking.