MOOSE Z900, Руководство пользователя

Страница: 25 / 51

Audible Zone Testing With Bell Test and Dialer Test
NOTE
The bell test and dialer test are not available on the Z900.
The TEST mode commands the keypad to beep continuously and light the
corresponding zone indicator, each time a zone is violated. The zone indicator
of each tested zone will remain lighted while each succeeding zone is tested.
Testing can be performed only while the system is disarmed. Testing the
system should be performed in both ELECTRICAL POWER AC ON and
STANDBY BATTERY modes. Your neighbors' understanding and cooperation is
very important. When you are away from your residence (or commercial
business), neighbors play an important role. Advise them that you have a
security system and ask them to notify the proper authorities if your system is
sounding. The burglar alarm typically has a pulsing bell and a fire alarm has a
steady horn sound.
NOTE
A lit zone indicator means that at least one sensor of that particular zone has
been tested. It does not necessarily mean that all sensors of that zone were
tested. It is recommended that you test your system on a weekly basis.
I.
The system must be disarmed.
2. Determine the area of protection which corresponds to each zone.
3. To simplify testing, all zones should first be secured (READY light
ON). If it is not possible to secure all zones prior to beginning the
walk test mode, please note that the keypad will beep continuously as a
result of the non-secure zones. This will eliminate the advantages of
the audible walk test mode, although the zone indicator lights may still
be relied upon for testing.
4. Press key 8 and hold for three seconds. The keypad will beep three times
to signify entry into the TEST mode.
5. To test the Bell for one second, press the "I" key and the Reset (*) key.
This feature allows you to test the system audible without having a
signal transmitted to the central station.
6. To test the dialer, press the "T' key and the Reset (*) key. A dialer test
signal will be performed with the central station (monitored systems