Manual Part No: 930006-01
MD Gas Grill
- 20 –
Manual Rev No: 1
Users Instructions (cont.)
Lighting the Grill
1)
Turn on the gas supply.
2)
Push-in and turn the Gas Tap anti-clockwise to the double flame position, and apply a lighted
taper to light the burner.
3)
Hold knob depressed for a further 30 seconds release and check that the burner remains alight.
4)
If the burner is extinguished on releasing knob, repeat steps 2 & 3.
Note
: - When first lighting the appliance after installation or after an extended shut-down period, it may
be necessary for the control knob to remain pushed-in for some time before the burner will light, owing
to the presence of air in the gas line.
To Turn Off
1)
For short periods, turn the control knob clockwise to the
OFF
position
λ
.
2)
For longer periods, turn the control knob clockwise to the
OFF
position
λ
, and close external
stopcock.
Note: -
The grill burner is partially blocked off (approximately a 50mm strip in the centre of the burner) this is
to give even heat distribution across the Toast Rack/Brander Plate.
Using the Toast Rack
The toast rack has a detachable crumb tray to catch falling crumbs etc; when the grill is withdrawn. The
grill can be used in any of the five runner positions, but for toast it is recommended that the rack be
horizontal and in the second position from the top, with the heat on
FULL
.
900 Grill
12 slices can be toasted simultaneously.
600 Grill
6 slices can be toasted simultaneously.
The toast rack may be used for a small quantity of foods, such as sausages or bacon, but the crumb tray
is NOT designed to hold a large accumulation of fat. If the grill is used for this purpose, it is
ESSENTIAL
TO REMOVE AND CLEAN THE TRAY
to avoid any fat deposits catching fire.
