The Interface Solution Experts
11
TMZ
PC-Programmable MODBUS
Temperature Transmitter
Allows such functions as New,
Open, Save and Print
Allows you to Upload and
Download configurations
Select the PC Port
(Comm Port) that you will use
Allows you to Monitor and
Stop monitoring processes
Provides functions specific to
your Custom Curve table
Controls whether Tool and Status
Bars are viewed on the screen
Displays the version of the TMZ
Configuration Program
Status and Tool Bar Legend
9.
Communications–
Indicates current PC
connection/communications status.
10. Input–
Use this tab to set your input parameters.
Refer to the
Input
section for a complete description.
11. Trimming–
This parameter allows you to
configure and perform sensor trimming. Refer to the
Trimming
section for a complete description.
12.
Scaling & Custom Curve–
Use this portion of
the screen to set up your custom curve table. Refer to
the
Scaling & Custom Curve
section for a complete
description.
13. MODBUS–
Allows you to configure your
MODBUS parameters. Refer to the
MODBUS
section
for a complete description.
Default/Factory Configurations
The following are the default factory settings for your
unit.
Input:
RTD 4W Pt3850 100Ohms
-240 to 960°C
Filter: 60Hz
Broken Wire: ON
Running Average Filter: ENABLED, 4
MODBUS:
Address: 1
Baud Rate: 9600
Parity: None LSW
No. of DP’s in integer: 0
