Moore Industries SPA2 TPRG Скачать руководство пользователя страница 72

Страница: 72 / 86

www.miinet.com

Moore Industries-International, Inc.

- 72 -

User’s Manual

224-790-00K

May 2018

Programmable Limit Alarm Trips

SPA

SECTION 5

You may also use the

Quick Set

feature to configure your

Analog Output

parameters and download

the settings.

Configure your parameters and click the

Quick Set

button in the window. The settings you have cho-

sen will be applied and downloaded to your unit.

Output Current/Voltage –

Displays the value presently at your output.

Trimming–

Output Trimming increases the accuracy of your instrument by calibrating its analog

output to the device that is receiving the output. This ensures that the instrument is being correctly

interpreted. Refer to Figure 25 for hook-up.

1. Click the “Lower” button to trim the Lower Output Range.

2. To “fine tune” trimmed values, place the value read on the external multimeter, connected to

your instrument for trimming, in the “Measured Loop Current” text box and click “Trim”.

3. Click the “Upper” button and repeat Step 2 to trim the Upper Output Range.

4. Once you have perfomed your output trimming, click “Unfix”.

Note:

Do not click the “Reset” button in the Trimming menu unless you want to disregard your

trimmed values and return to the manufacturer’s trim values.

Output Test–

This test may be performed in order to check output performance and accuracy and

to trim other instruments in your setup. Your output will be a current value, in mA, or a voltage equal

to the value you enter into the text box You can check the other devices on the system and calibrate

them to this signal.

This feature is independent of the input. If you find that the output requires adjustment, you may per

form the Trimming function.

1. Ensure that SPA

monitoring is stopped. In the “Fix current/voltage” text box, enter a

valuebetween 0-20mA (for current) or 0-10V (for voltage) and click the “Fix” button.

2. Return to monitoring the SPA

. You will see the “fixed” value in the “Output Current/Voltage”

display and on the external multimeter.

3. Once you have finished, click “Unfix”.

Note:

While

performing Analog Output Trimming functions, you may notice a message in the “SPA

Status” display reading “**OUTPUT FIXED**”. Clicking the “Unfix” button will clear this message.

Содержание SPA2 TPRG























































































Результаты поиска

Содержание SPA2 TPRG

Отзывы:

Похожие инструкции для SPA2 TPRG

Бренды по названию

Популярные бренды

Moore Industries SPA2 TPRG, Руководство пользователя

Результаты поиска

Содержание SPA2 TPRG

Отзывы:

Похожие инструкции для SPA2 TPRG

Бренды по названию

Популярные бренды