moon i-5080 Скачать руководство пользователя страница 10

MOON i-5080 Integrated Amplifier 

 

 

Operating the i-5080  

 

 
 

Making the AC Connection

 

 

1.

 

Connect the supplied AC power cable to the IEC receptacle, located on the rear panel of the 
integrated amplifier’s chassis.  Alternatively, if you wish, you may use a dedicated high-
performance AC cable designed for integrated amplifiers.  Ensure that the AC wall outlet you use 
has a functioning ground.  For the best sonic performance, it is preferable that you plug your 
MOON i-5080 directly into a dedicated AC outlet and avoid using an extension cord.   

 

2.

 

In order to obtain the maximum performance from your audio system, we strongly recommend that 
the detachable power cord not come into physical contact with any of the interconnect and speaker 
cables running to and from your i-5080.  In the event that this can’t be avoided, you should 
ensure that any cables coming into contact with each other are crossed at ninety degree angles to 
minimize the contact area.

 

 

Turning on your MOON i-5080 for the first time  

 

Prior to turning the integrated amplifier on for the first time, make sure that every cable is properly 
connected to avoid any problems.  Then turn on your integrated amplifier in the following manner: 

 

1)

 

Flick the main rocker switch labeled “POWER” to the ‘1’ (on) position on the rear of the i-5080.   

 

2)

 

Press the push button labeled “Stand by/On” on the i-5080.  The red LED will illuminate and the 

digital display will indicate a gain setting of ‘0’ and the ‘CD’ as the default input. 

 

On and Off Sequence 

 

To avoid having any annoying noises (i.e. “thumps” and “pops”) emanate from your speakers when 
powering your i-5080 on or off, you should  

 

1)

 

Always power up your i-5080 integrated amplifier after powering up your source component(s). 

 

2)

 

Always power down your i-5080 before powering down your source component(s). 

 

We recommend that you leave your MOON i-5080 integrated amplifier powered up at all times to 
maintain optimal performance.  In the event that you plan to be away from your home for a few days, 
powering off the i-5080 may not be a bad idea.  Once fully “broken-in”, please keep in mind that your 
i-5080 will require several hours of playing time before it reaches its peak performance after you’ve 
powered it up again. 

 

____________________________________________________________________________________

Operating The i-5080   

 

 

                                                        10 

Содержание i-5080














Отзывы: