Menu Button Cont.
When the Menu button is off, the device is in Low Gain Mode with volume controls enabled.
When the Menu button is glowing white the device is in High Gain Mode with the volume controls enabled.
This is considered the main menu and the device will auto return to this menu after sitting for awhile in a different menu
This does not apply to Lockdown Mode, which locks the device.
In the
Dark Blue
menu, the ‘-’ button will control the brightness of the buttons. Continued pressing of the “-” will cycle
through all levels of brightness.
The ‘+’ button will cycle through the Crossfeed modes.
Red
= Bass,
Yellow
= MidBass,
Green
= Mid Treble,
Blue
= Upper Treble
Red, Yellow, Green
and
Light Blue
are each EQ controls for the frequency ranges mentioned in the table (found on the
next page under “Equalization”).
An example of how to use this: If you want to boost the bass of your music, you would select the
Red
option and press the
‘+’ button to increase bass presence. Similarly, to reduce bass, you would press the ‘-’ button.
This will be covered in more detail in the EQ section.
When the menu button glows purple the device can enter “Lockdown Mode.” While the menu button glows purple press
both the ‘+’ and ‘-’ to Lockdown the buttons. The ‘+’ and ‘-’ will Glow purple for a few seconds before returning to display
your current volume settings. To leave “Lockdown Mode” press the menu button, and then ‘+’ and ‘-’ simultaneously. This
will re-enable all device controls
Crossfeed
When the menu button is
Dark Blue
, pressing the “+” option will cycle through crossfeed options. Crossfeed is done to
improve the imaging and soundstage presentation of your music. There are four options available:
Red:
Minimum
Green:
Moderate
Blue:
Maximum
Unlit:
Crossfeed off
Содержание CHORD MOJO 2
Страница 1: ...CHORD MOJO 2 PRODUCT GUIDE BY...
