Moomba Craz, Руководство пользователя

Страница: 51 / 72

51
© 2016 Skier’s Choice, Inc.
D
Ual
b
aTTeRY
(o
PTIon
) H
ookUP
O
50 amp Breaker
Bilge Pump (3 amp)
Stereo Memory
(15 amp)
2 1
1&2
2
yr
ett
a
B
1
yr
ett
a
B
Engine
Dash Power
The optional dual battery setup is designed to create a
redundant system allowing the user to have a back up
battery. The switch must be used in the “1” or “2” position
to create the redundancy.
To properly hook up the two batteries;
1. Connect the grounding strap provided from the negative
(-) post on Battery 1 to the negative (-) post on Battery 2.
2. Connect the negative (-) cable from the grounding buss
bar to the negative (-) post on Battery 1.
3. Connect the negative (-) cable from the engine to the
negative (-) post on Battery 1.
4. Connect the positive cable from the left side of the battery
switch to the positive (+) post on Battery 1.
5. Connect the positive cable from the bottom of the switch
to the positive (+) post Battery 2.
Battery 1 is designated as the primary battery and Battery 2
is designated as the secondary battery.
The battery selector switch has four positions; Off, 1, 2, 1&2.
• The “Off” position cuts all power to the boat except to the
bilge pump and stereo memory.
• Position “1” only allows power to be drawn from or charged
to Battery 1.
• Position “2” only allows power to be drawn from or charged to Battery 2.
• Position “1&2” allows power to be drawn from or charged to both batteries.
CAUTION!
- Do not turn the selector switch to the “Off” position when the motor is running. The alternator will be permanently
damaged and is not covered under Skier’s Choice or Indmar warranty.
It is highly recommended that Position “1” be used in most situations so the secondary battery will be available to start the engine
from Battery 2 (secondary) if necessary.
Be aware that if position “1&2” is selected, both batteries will drain power at the same time and could leave you stranded due to
weak batteries.
NOTE: It is recommended that you fully recharge your batteries using a battery charger periodically or after a period of high
discharge (running many accessories for an extended period of time).
NOTE: Skier’s Choice highly recommends using quality “Dual Purpose” batteries.
s
Ingle
b
aTTeRY
(s
TanDaRD
) H
ookUP
The standard battery hookup is very similar to an automotive
application. There is one red battery cable that connects to the
positive (+) battery terminal and one black cable that connects
to the negative (-) battery terminal. The positive cable from
the battery goes to a power switch which allows you to turn
power on or off to the dash components and engine. The
stereo memory and bilge pump power will not be terminated
by selecting the off position on the battery switch.
CAUTION! - Do not turn the selector switch to the “Off” position
when the motor is running. The alternator will be permanently
damaged and is not covered under Skier’s Choice or Indmar
warranty.
NOTE: It is recommended that you fully recharge your batteries
using a battery charger periodically or after a period of high
discharge (running many accessories for an extended period
of time).
50 amp Breaker
Bilge Pump (3 amp)
Stereo Memory
(15 amp)
Off
On
1
yr
ett
a
B
Engine
Dash Power