44
PRESET NAME
PRESET NAME is a function that allows the user to assign a name to a preset
containing up to 24 characters on two twelve character lines. Characters are selected
by moving the cursor to the desired character location and scrolling through the
character list. The cursor can be moved with the CURSOR button, or by tapping the
bottom half of the touchpad (referred to as T-S). Characters can be selected by using
the +/-1 button, or by moving your finger horizontally across the top half of the
touchpad. Available characters are:
<space> !
“
# $ % &
‘
( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J
K L M N O P Q R S T U V W X Y Z [ \ ] ^_ ` a b c d e f g h I j k l m n o p q r s t u v w x y z {
| } ~
Once a name is entered, it must be saved to be stored in memory. Below is the routine
for saving presets.
SAVE PRESET
SAVE PRESET allows the user to store all the Voyager’s current front panel settings, Pitch
Bend Amount, Programmable Mod Sources and Destinations, Keyboard Mode, Trigger
Mode, and Preset Name to one of 128 Memory locations. To save your edited sound,
enter EDIT mode, use the +/- 1 buttons to highlight SAVE PRESET and press ENTER. The
screen displays across the top line EDIT STORE TO PRESET X, where X is the current preset
number. Below that, the preset name that is already stored in memory is displayed. Use
the +/- 1 buttons to select the preset location where you want to store your current
settings, then press ENTER. The screen then confirms your decision, and prompts you to
select Yes or No. Use the cursor button to select Yes and press ENTER. The previously
stored values for the selected preset are now replaced with your new values.
