41
3. EDIT Mode
EDIT Mode is used to determine parameters of a preset not accessible through the
front panel and to name and save presets. EDIT mode is entered by pressing the EDIT
button. When this is done, a list appears that displays the different options. Using the +1
or –1 buttons moves the list items to highlight a new line. The Options in EDIT mode are:
RECALL
REAL PANEL CONTROL
PITCH BEND AMOUNT
PROGRAMMABLE MOD WHEEL MOD BUSS SOURCE
PROGRAMMABLE MOD WHEEL MOD BUSS DESTINATION
PROGRAMMABLE PEDAL/ON MOD BUSS SOURCE
PROGRAMMABLE PEDAL/ON MOD BUSS DESTINATION
KEYBOARD MODES
TRIGGER MODES
TOUCH SURFACE MEMORY
INITIALIZE PARAMETERS
PRESET NAME
SAVE PRESET
RECALL:
RECALL is a function that returns to a previously edited version of a sound.
This is used in conjunction with PANEL Mode. If you are in PANEL Mode and make
changes to a preset and then press ENTER, the sound reverts to the original saved
settings. If you want to get back your tweaks, Press the EDIT button to enter EDIT mode –
RECALL will be highlighted. Press ENTER, and the display will prompt “Recall the last
edited sound? Yes/No”. Use the cursor button to select Yes and press ENTER. You will
now hear the changes you made to the preset. At this point if you want to keep those
changes, you can save the preset. RECALL can also be used to return to a preset
sound after the parameters are initialized (INIT. PARAMETERS or REAL PANEL CONTROL,
see below).
REAL PANEL CONT.:
REAL PANEL CONTROL is a function that enables the operation of the Voyager from
the front panel. To use this function, enter EDIT MODE by pressing the EDIT button. Press
the +1 key to highlight REAL PANEL CONT. and press ENTER. The screen prompts: “Load
the actual Panel Parameters Yes/No?” Use the CURSOR button to select Yes and press
ENTER. The sound produced when the keyboard is played is now determined by the
settings of the front panel controls.
PITCH BEND AMT.:
PITCH BEND AMOUNT allows the user to set a pitch bend range for each preset.
Highlight the PITCH BEND AMT. function in the EDIT Menu and press ENTER.
Use the +/- 1 buttons to select the desired range for the pitch bend wheel.
The options are:
Off
+/- 2 Semitones
+/- Minor Third
+/- Major Third
+/- Fourth (default)
