Moog G394-020, Руководство по эксплуатации

Страница: 27 / 60

moog
MSD Servo Drive Compact Operation Manual
27
[ Installation ]
to t
he g
lo
ss
ar
y
to t
he t
ab
le o
f c
on
te
nt
s
Id no.: CA97555-001, Rev. 3.0 - Date: 06/2012
3.12 Encoder connection
All encoder connections are located on the top of the unit.
3.12.1 Encoder connection of the synchronous motors
Please use the ready made-up motor and encoder cables from Moog GmbH to connect
the synchronous motors (see Servo motors Ordering Catalog).
3.12.2 Matching motor - encoder cable - drive connection
Compare the rating plates of the components. Make absolutely sure to use the correct
components according to variant A, B or C!
Resolver
High-resolution encoder
Variant
A
Variant
B
Variant
C
High-resolution encoder
X
1
X
6
X
7
(optional
X
8
)
Fig. 3.15 Matching motor/encoder cable
Motor (with installed encoder) Encoder cable
Connection
of the
servo drive
Variant A
with resolver
without further option
C08335-011-yyy X6
Variant B
Sin/Cos single-turn / multi-turn encoder
with SSI/EnDat interface
CA58876-002-yyy X7
Variant C
Sin/Cos single-turn / multi-turn encoder
with HIPERFACE® interface
CA58877-002-yyy X7
Table 3.7 Variants of motors, encoder type and encoder cable
NOTE: Do not split the encoder cable, for example to route the signals via
terminals in the switch cabinet. The knurled screws on the D-Sub connector
housing must be tightly locked!