Moog G305-170, Руководство по эксплуатации

Страница: 77 / 90

MSD Single-Axis System Operation Manual AC-AC Servo Drive
ID no.: CA65642-001 06/2018
moog
77
A.2.6 G395-250 to G395-450, liquid cooling
Designation
Technical data
G395-250 G395-325 G395-450
Output, motor side
1)
Voltage
3)
3-phase U
Mains
Rated current, effective (l
N
) 250 A 325 A 450 A
Peak current See A.1.6
Rotating field frequency 0 ... 400 Hz
Switching frequency of the power stage 2, 4 kHz (8, 12, 16) 2)
Input, mains side
Mains voltage (3 x 230 V/ 3 x 400 V/ 3 x 460 V/ 3 x 480 V) ±10 %
Device connected load (with mains choke) 173 kVA 225 kVA 310 kVA
Current
1)
(with mains choke) 250 A 325 A 450 A
Asymmetry of mains voltage ±3 % maximum
Frequency 50/60 Hz ±10 %
Power dissipation at I
N
1)
3960 W 4800 W 6750 W
DC link
Capacitance 3600 µF 5400 µF 7200 µF
Brake chopper switch-on threshold 820 V DC
1) Data referred to mains voltage 3 x 400 V
eff
and switching frequency of the power stage 4 kHz
2) When designing the drive, it is to be taken into account that the maximum output voltage reduces as a function of the active power.
3) Connection of an ext. braking resistor to devices with int. braking resistor not permitted (model G395-xxx-xxx-xx2)!
4) Cooling performance adequate also with optional internal braking resistor
Table A.14 Technical data G395-250 to G395-450 liquid cooling
Designation
Technical data
G395-250 G395-325 G395-450
Minimum ohmic resistance of an externally installed
braking resistor
3.2 Ω
3)
2.5 Ω
3)
1.7 Ω
3)
Brake chopper peak power
with external braking resistor
210 kW 269 kW 395 kW
Option: internal braking resistor 3.3 Ω 2.4 Ω
Brake chopper continuous power
with internal braking resistor
5000 W 6800 W
Brake chopper peak power
with internal braking resistor
204 kW 280 kW
Chiller data
Coolant pressure
(rated value / maximum value)
1 / 2 bar
Coolant flow rate
4)
(rated value / maximum value)
11 / 13 l per min
Feed coolant temperature
The coolant temperature can be b5 °C (+41 °F) and
+40 °C (+104 °F). However, the coolant temperature should
not be more than 10 °K below the ambient temperature to
prevent condensation on the heat sink.
1) Data referred to mains voltage 3 x 400 V
eff
and switching frequency of the power stage 4 kHz
2) When designing the drive, it is to be taken into account that the maximum output voltage reduces as a function of the active power.
3) Connection of an ext. braking resistor to devices with int. braking resistor not permitted (model G395-xxx-xxx-xx2)!
4) Cooling performance adequate also with optional internal braking resistor
Table A.14 Technical data G395-250 to G395-450 liquid cooling