- -
Installing the Axis 231D/232D Camera (cont.)
13. To manage the input cable running from the connector
block to the camera use the (2) cable tie mounts and
cable ties that are located in the housing packet.
12. Make wiring connections to connector block assembly per
camera instructions.
For Model 25733 only
CONTROL
RJ45 Ethernet Connector
ALARMS
1
Alarm 1
Blue
2
Alarm 2
Violet
3
Alarm 3
Gray
4
Common
White
POWER
1
Camera Power (24VAC)
Red
2
Camera Power (24VAC)
Orange
14. Now grab the camera assembly and connector the RJ45
cable and the input cable to the camera (see diagram
opposite).
15. Now attach the camera assembly to the housing by sliding
the (3) open screw slots over the screws in the housing.
Slide the bracket forward, and the tighten the captive
screw on the bracket.
Open screw slots
Captive screw
Cable Tie Mounts
Cable Ties
