Moog Videolarm IP Ready RHP75C2N Скачать руководство пользователя страница 2

-  -

!

!

SAFETY PRECAUTIONS

IMPORTANT SAFEGUARDS
1. 

Read Instructions - All the safety and operating  instructions 

should be read before the unit is operated.

2. 

Retain  Instructions  -  The  safety  and  operating    instructions 

should be retained for future reference.

3.

 Heed Warnings - All warnings on the unit and in the operating 

instructions should be adhered to.

4. 

Follow Instructions - All operating and user instructions  should 

be followed.

5. 

Electrical Connections - Only a qualified electrician should make 

electrical connections.

6. 

Attachments - Do not use attachments not recommended by 

the product manufacturer as they may cause hazards.

7. 

Cable Runs - All cable runs must be within permissible 

    distance.  
8. 

Mounting - This unit must be properly and securely mounted to 

a supporting structure capable of sustaining the weight of the 
unit.  Accordingly:

  a. The installation should be made by a qualified installer.
  b. The installation should be in compliance with local codes.
  c.  Care  should  be  exercised  to  select  suitable  hardware  to 

install the unit, taking into account both the composition of 
the mounting surface and the weight of the  unit. Be sure to 
periodically examine the unit and the supporting structure to 
make sure that the integrity of the installation is intact.  Failure 
to comply with the foregoing could result in the unit separating 
from the support structure and falling, with resultant damages 
or injury to anyone or anything struck by the falling unit.

WARRANTY INFORMATION
  Videolarm, Incorporated warrants that products sold hereunder 

shall  be  fit  for  the  ordinary  purpose  for  which  said  products 
are  intended  and  shall  be  free  from  defects  in  material  and 
workmanship  for  a  period  of  two  years  from  date  of  sale  to 
buyer.  Videolarm  makes  no  other  warranty  of  any  kind  with 
respect to this product, whether expressed or implied, including, 
without limitation, the implied warranty of fitness for a particular 
purpose.  

 
  In the event of a breach of the above warranty, Videolarm shall, 

at its option, repair or replace said product.  This is Videolarm's 
sole obligation under this warranty.  In no event shall Videolarm 
be liable for any incidental or consequential damages, as defined 
in section 2-715 of the Uniform Commercial Code by a breach 
of this warranty.

 
  Videolarm shall repair or replace defective products upon shipment 

of products prepaid to Videolarm, Inc.,  2525 Park Central Blvd., 
Decatur, GA  30035.

  Repairs made necessary by reason of accident, misuse or normal 

wear shall be charged at Videolarm's standard rate.  This warranty 
gives you specific legal rights, and you may also have other rights 
which vary from state to state.

UNPACKING
  Unpack  carefully.    Electronic  components  can  be  damaged  if 

improperly handled or dropped.  If an item appears to have been 
damaged in shipment, replace it properly in its carton and notify 
the shipper.

  Be sure to save:
1. The shipping carton and packaging material.  They are the safest 

material in which to make future shipments of the equipment.

2. These Installation and Operating Instructions.

SERVICE
  If the unit ever needs repair service, the customer should contact 

Videolarm (1-800-554-1124) for authorization to return and shipping 
instructions.

TECHNICAL SUPPORT
  If technical support is needed, Videolarm has set-up a 24 hour 

technical support line for their customers.

1-800-554-1124

CAUTION:  TO REDUCE THE RISK OF 

ELECTRICAL SHOCK, DO NOT EXPOSE  

COMPONENTS TO WATER OR MOISTURE.

The  lightning  flash  with  an  arrowhead  symbol, 
within an equilateral triangle, is intended to alert the 
user to the presence of non-insulated "dangerous 
voltage" within the product's enclosure that may 
be of sufficient magnitude to constitute a risk of 
electric shock to persons.

The  exclamation  point  within  an  equilateral 
triangle is intended to alert the user to presence of 
important operating and maintenance (servicing) 
instructions  in  the  literature  accompanying  the 
appliance.

24 HOUR TECHNICAL SUPPORT

CAUTION

RISK OF 

ELECTRIC SHOCK!

Содержание IP Ready RHP75C2N


































Отзывы: