GB
3.8.2 Connect to WIFI:
Step1:
Activate the Power switch, press the "WIFI” button, the WIFI sign will start to
flash rapidly, open the APP on your smart phone and add your device. Choose "Add
Device”, then "Add Manually”, "Home Appliances (Small)” and then choose "Heater” to
add the device.
Step2:
Enter the WIFI password of your home network. Please make sure your home
WIFI is working as well as keep the heater and smartphone as close as possible to the
WIFI router.
Please notice that this heater is only working with 2.4GHz WIFI networks, it doesn’t
support 5GHz networks currently. Also, make sure your internet router has enough
capacity to add a new device.
Step3:
Wait till the connecting status shows 100% to finish the settings and the WIFI
signal on the control box will stop flashing.
If you failed to connect, please power off the heater and power it back on again after a
few seconds. Long press the "WIFI” button on the control box until the WIFI sign on the
screen is flashing slowly and repeat the connection process.
Содержание 1359320
