www.Deuba24online.de
www.Deuba24online.de
Always shut down the shredder (power unit must
be disconnected from the mains) when you leave
the work area.
Do not tilt the machine when the motor is
running.
5.3 Maintenance and Storage
If the machine is deactivated for maintenance,
inspection, storage, or for exchanging a part,
(power unit must be disconnected from the
mains), ensure that all moving parts are still and
any tools/spanners have been removed. Let the
machine cool before any inspection or repair.
When maintaining the blade mechanism, make
sure that the the power source cannot activate
due to the protective locking device; the blades
could always be activated by a hand-start
mechanism.
5.4 Additional Safety Instructions for Devices
with Collecting Containers
Shut down the shredder before attaching or
removing the collecting container.
6.Operating Instructions
WARNING: You may need
help unpacking and assem
-
bling the machine.
After unpacking and inspecting the shredder for
damage, proceed with the following steps:
6.1 Assembling the Garden Shredder
7. Operation
7.1 On/off switch
Press the on/off switch to switch on or off the
shredder.
Note: This machine is
equipped with an electromag
-
netic switch to prevent it from
being unexpectedly switched
on when power source recov-
ered.
7.2 Overload protection
Overload (e.g. blocking up of the chopping knife)
will lead to a standstill of the machine after a
few seconds. To protect the motor from getting
damaged, the overload switch will automatically
cut off the mains supply.
Wait at least 1 minute before restarting by first
pressing the reset button and then the on/off
switch. If the motor does not start, proceed as
follows:
Remove the plug from the outlet.
Loosen the hand screws and open up the upper
part.
Carefully clean the cutting and ejection elements.
Remove any objects that could prevent cutting.
Put the upper part back in place and attach the
hand screws securely.
Press the reset button before pressing the on/off
switch.
WARNING: Always wear
protective gloves during the
above steps.
WARNING: Never loosen
the hand screws before deac
-
tivating the unit and removing
the plug from the outlet.
7.3 Disassembly
Under certain circumstances (e.g. storage after
use), the machine can be disassembled by
following the assembly steps in reverse order.
7.4 Operating Instructions
Place the material in the feed opening on the
right side. The machine automatically pulls it into
the blade, which rotates counter-clockwise.
Do not place too much material into the opening
at once to avoid blocking the device. If shredding
damp and rotted garden waste, alternate with
branches so as to avoid blocking the blade.
Compost soft kitchen waste. Do not place it in
the shredder.
Turn the shredder over.
Fold both legs up and insert the supplied axle
through the openings.
Place both washers on the left and ride side of
the axle.
Place the supplied threaded spacer on the axle.
Then attach the wheels and finally the safety
nuts with the wheel covers.
WARNING: Be careful when
leaning the device on the
wheels, since the weight is
unbalanced when titled and
moved.
6.2 Collecting Container
Pull up the safety grip and slide the collecting
container into the under frame.
1
2
3
4
5
on/off
switch
Reset
button
20
21
