‐
25
‐
Actual temperature for grill body probe
8.1
Electrical Parameters
(1) Input Voltage
:
AC110V ~ AC120V 60Hz
(2) Max Power
:
250W
(3) Motor Power
:
25W ±10%
(4) Fan Power
:
25W ±10%
(5) Ignitor power
:
200W ±10%
(6) Probe type
:
PT1000
8.2
wiring Diagram
Red white: Present transmission motor
Yellow white: Present fan motor
Purple white: Present ignitor probe
Black white: Present power
8.3
Fan Work
Fan start working after machine starts. Fan will keep running for 10 min after machine shut off or temperature
decrease to 130F
8.4
Fire Rod Work
(1) First ignition, keep pressing the power button, the ignition rod will run for 8 min after motor running 1 min.
(2) The grill will restart ignition when temperature less than 135
℉
restart and will stop ignition when temperature
higher than 170
℉
.
(3) When temperature less than -15
℉
When set at 250
℉
(For example, temperature less than 235
℉
), the ignition
on/off 5 min, shut off the ignition after temperature increased -5
℉
8.5
Feeding Motor
1
st
pellet feeding, off 15s and on 30 feeding. It will start 2nd feeding after detection temperature increase 40
℉
2
nd
pellet feeding, will continue PID feeding when detection temperature higher then 135
℉
, lessthan 135
℉
, will
Содержание 86030
