16
- Press the delay start button once to
activate it (
h00
appears on the display)
and then press it again to set a
1 hour
delay (
h01
appears on the display). The
pre-set delay increases by
1 hour
each
time the button is pressed, until
h24
appears on the display, at which point
pressing the button again will reset the
delay start to zero.
- Confirm by pressing the
START/PAUSE
button. The delay countdown will begin
and when it has finished the programme
will start automatically.
It is possible to cancel the delay start by
turning the programme selector to
OFF.
If there is any break in the power supply
while the machine is operating, a special
memory stores the selected programme
and, when the power is restored, it
continues where it left OFF.
For automatic washing/drying cycle:
after the selection of washing programme
according to laundry type, select a degree
of dryness by pressing this button. At the
end of the washing programme, the
selected
drying
cycle
will
start
automatically.
If a washing programme is not compatible
with automatic drying selected, this
function will not be activated.
If you want delete the selection
before
the programme starts
, please press
repeatedly the button until the lights go off
or reposition the programme selector to the
OFF
position.
Drying only cycle:
select via the knob the desired drying
programme in conjunction with your
fabrics, by pressing this button it is possible
to select a degree of dryness that is
different to the default one (except for the
wool drying programme).
To cancel the cycle
during the drying
phase
, please press the button for about
3
seconds
.
"End"
will appear in the display at the
end of the program and the DOOR
LOCKED light will go off, it is now possible
to open the door.
