15
Press the
START/PAUSE
button to start
the selected cycle.
Once a programme is selected the
programme selector remains stationary on
the selected programme till cycle ends.
"End"
will appear in the display at the
end of the program and the DOOR
LOCKED light will go off, it is now possible
to open the door.
Switch off the washing machine by
turning the selector to
OFF
.
Press to start the selected cycle.
ADD OR REMOVE ITEMS AFTER THE
PROGRAMMES HAS STARTED (PAUSE)
Press and hold the
START/PAUSE
button for about
2 seconds
(some
indicator light and the time remaining
indicator will flash, showing that the
machine has been paused).
Wait until the DOOR LOCKED light has
gone out before opening the door.
After you have added or removed items,
close
the
door
and
press
the
START/PAUSE
button (the programme
will start from where it left off).
CANCELLING THE PROGRAMME
To cancel the programme, set the
selector to the
OFF
position.
Wait
2 minutes
until the safety device
unlocks the door.
This button allows you to pre-programme
the wash cycle to delay the start of the
cycle for up to
24 hours
.
To delay the start use the following
procedure:
- Select the required programme.
