Montigo Proflame 2, Руководство по эксплуатации и техническому обслуживанию

Страница: 7 / 10

Page 7
Proflame 2 Transmitter
XG0677 - 141231
Operation
Continuous Pilot (CPI) Selection .............
(Optional)
In cold weather climates, the pilot burner can stay
on continuously to prevent condensation or cold air
temperatures near the fireplace glass.
Note
, some
jurisdictions do no permit use of continuous pilot system.
Check local codes or contact your Montigo dealer.
WARNING:
Do NOT use CPI with optional Power Vent.
With the system in "off" position press the Mode Key, see
figure 1 , to index to the CPI mode icon, see figure 14 .
Pressing the Up Arrow Key will activate the Continuous
Pilot Ignition mode (CPI). Pressing the Down Arrow Key
will return to IPI. A single "beep" will confirm the reception
of the command.
NOTE:
- Requires CPI switch (not supplied).
- Set the CPI/IPI switch to CPI position (Switch closed) to
enable remote CPI/IPI operation.
- Set the CPI/IPI switch to IPI position (switch open) to
disable remote CPI/IPI operation. The system will now
work in IPI mode only regardless of the selection on the
remote control hand set.
Figure 14. Continuous Pilot / Intermittent Pilot Selection
Key Lock
This function will lock the keys to avoid unsupervised
operation. To activate this function, press the Mode and
Up Keys and the same time, see figure 15 . To de-
activate this function, press the Mode and Up Keys and
the same time.
Figure 15. Key Lock