Montigo P38, Инструкция по установке и обслуживанию

Страница: 44 / 52

44
Operation
XG0199 - 170223
Fan Speed Control
The fireplace is equipped with optional hot air circulating fans.
The speed of the fans can be controlled by the Proflame system.
The fan speed can be adjusted through six (6) speeds. To activate
this function use the Mode Key, see Figure 27, to index to the fan
control icon, see Figure 27m. Use the Up/Down Arrow Keys to
turn on, off, or adjust the fan speed. A single "beep" will confirm
reception of the command.
Fan Speed Control
The fireplace is equipped with optional hot air circulating fans.
The speed of the fans can be controlled by the Proflame system.
The fan speed can be adjusted through six (6) speeds. To activate
this function use the Mode Key, see Figure 27, to index to the fan
control icon, see Figure 27m. Use the Up/Down Arrow Keys to
turn on, off, or adjust the fan speed. A single "beep" will confirm
reception of the command.
Disabling Thermostat
Some jurisdictions and bedroom installations require the
thermostat to be disabled.
1. Partially take out one battery, see Figure 27k.
2. Insert the battery while holding down the thermostat button.
The remote screen will display 'Clr' while the button is held
down. See Figure 27l.
3. To enable thermostat repeat steps 1-2. The remote screen will
display 'set' while the thermostat button is held down.
Accent Light Control (P units only)
The fireplace may be equipped with accent lights. The auxiliary
function controls the Accent Lights. To activate this function use
the Mode Key, see figure 27, to index to the AUX icon, see figure
27n.
Pressing the Up Arrow Key will turn the light on. Pressing the
Down Arrow Key will turn the light off. A single "beep" will
confirm the reception of the command.
Figure 27.m Fan Speed Control
Figure 27.n Light Control
Figure 27.k
Figure 27.l