8
1
•
888
•
557
•
3848
Wards.com
9
Operating Instructions
Control Panel
Time indicator
Celsius & Fahrenheit degree
indicators
Digital display
Up
Mode button
–
Used to select three operating modes:
• Auto:
Press the Mode button until the Auto indicator light illuminates. In this mode,
the unit will automatically switch to cooling when the ambient temperature is above
77
°
F and to fan mode when below.
• Cooling:
Press the Mode button until the COOL indicator light illuminates. Press
Up/Down buttons to set desired room temperature. The temperature can be set
within a range of 63
–
86°F. Press the Speed button to select high/low fan speed.
• Fan:
Press the Mode button until the FAN indicator light illuminates. Press the
Speed button to adjust the speed from low to high, for which the corresponding
indicator will illuminate. In fan mode, the temperature cannot be adjusted.
Timer button
–
Use this button to designate the number of hours (up to 24) the unit
should run continuously until automatically shutting down
or the number of hours until
the unit automatically starts. Each press of the button increases the time, which is
displayed on the control panel, by 1 hour. When the display reaches 24, pressing the
Timer button again will cancel the timer. When the timer is set, the timer indicator will
illuminate. When the unit starts, the indicator light will go out and the ambient
temperature is displayed.
To set number of hours for continuous operation, press Timer button when the AC is
powered ON.
Pressing the Timer button twice within 5 seconds of powering OFF the unt will cancel
the timer function.
To set the number of hours until the unit automatically powers up, press the Timer
button when the AC is OFF.
Up/Down buttons
–
Increases/decreases temperature setting by one degree for
each push of the button.
Speed button
–
Sets fan speed to High or Low.
Power button
–
Powers the unit ON/OFF.
Operating Instructions
(cont’d)
Mode
Power
Fan
Timer
Down
