Monterey 184 FS, Руководство пользователя

Страница: 15 / 69

Gemlux Stainless Steel Information and Care Instructions
The GEMLUX Stainless Steel products on your boat are made to the
highest quality standards.
Stringent quality control processes such as
metallurgical analysis, precision polishing, multiple inspections and Six Sigma
procedures ensure the highest quality possible. In order to ensure that your
GEMLUX Stainless Steel maintains its beautiful finish, it is critical that you
care for it properly.
WARNING:
Your Stainless Steel can be damaged by exposure to acids and other
corrosive agents found in many cleaning products. A partial list of additives that may
cause staining and a weakening of the finish is provided below. Use of these and other
similar solutions to clean your boat can cause your Stainless Steel to bleed and will void
your warranty.
Cleaning and Cleansers
Frequent cleaning of your stainless steel with soap, water and GEMLUX
Cleaning Wax will help maintain the finish. Always rinse the metal
thoroughly with clean water and dry completely. Clean soft cloths or pads
should be used. The use of steel wool pads or other highly abrasive
brushes or sponges are not recommended and will damage the surface.
Contamination of the surface by chemicals, dirt or other material hinders the
passivation process and traps corrosive agents, thus reducing corrosion
protection. If your stainless is exposed to such chemicals it should be re-
passivated with GEMLUX Passivation solution.
For purchase information on the GEMLUX Cleaning Wax or GEMLUX Passivation Solution,
please contact us at the numbers listed below.
Tel: 904-264-0173 / 888-GEMLUX-1 (888-436-5891) • Fax: 904-269-5905
www.gemlux.com
Job Cleanin g A g ent s Method Comment s
Routine cleaning Soap and water
Apply with a sponge
or soft cloth. Dry area
completely.
Stubborn stains,
discoloration or
bleeding
GEMLUX Cleaning
Wax
Apply with soft, dry
cloth. Allow to dry.
Polish and buff using
a clean, dry cloth.
Once your stainless is
free of discoloration
and/or bleeding, spray
GEMLUX Passivation
Solution directly onto
stainless. Allow to cure
for 30-60 seconds.
Rinse with fresh water
and dry the area. This
solution will help
re-passivate the
stainless steel.
M-8
Chlorsulphonic Acid
Ferrous Iodide
Hydrobromic Acid
Iodine
Sodium Chlorite
Sulphur Chloride
Bleach Comet
EZ-ON, EZ-OFF
Cleaner
Ferric Chloride
Fluorine
Hydrofluosilicic Acid
Silver Chloride Sodium
Hypochlorite
Sulphuric Acid
Muriatic Acid
On & Off Cleaner
Rust StainsAway
Ferrous Chloride Hydrochloric Acid
Hydrofluoric Acid
Sodium Bifluoride
Stannic Chloride
SnoBol
Soft Scrub
MarineSpray
Sport Boat_Sect_M_2011_Sport Boat_Sect_M.qxd 9/27/10 1:03 PM Page 8