Monterey 184 FS, Руководство пользователя

Страница: 16 / 69

M-9
Gelcoats
The smooth, beautiful skin of the fiberglass hull is made of gelcoat. Gelcoat is
a strong but thin (though thicker than automotive paint) layer of colored resin.
The best way to keep the gelcoat skin on your boat in top condition is through
regular maintenance. The following guidelines will help keep gelcoat looking
good for years to come.
DO’S
l
Keep the gelcoat surface out of direct sunlight or covered when not in use.
l
Wash gelcoat frequently (daily in salt or polluted environments) with mild
detergent and plenty of fresh water. Remove any stains quickly. Gelcoat is
microscopically porous, so long term staining may become permanent.
l
Regularly (monthly in salt or polluted environments) wax gelcoat surfaces
with marine grade wax recommended for fiberglass finishes.
DON’TS
l
Do not use plastic or other non-porous (non-breathable) materials to
cover gelcoat surfaces. Trapped moisture from condensation can cause
gelcoat damage. Shrink wrap storage covers must be properly ventilated,
including hullsides.
l
Do not use abrasives, bleaches, ammonias, acids or harsh detergents.
See your dealer for special marine formulations.
l
NEVER wax a gelcoat surface in direct sunlight.
l
Do not attempt to remove stains and scratches. Chalking, stains, and
minor scratches can be removed in most cases with careful rubbing and
polishing with appropriate chemicals and is best done by a professional –
see your dealer.
Sport Boat_Sect_M_2011_Sport Boat_Sect_M.qxd 9/27/10 1:03 PM Page 9