Monte Carlo Fan Company Crystoria, Руководство пользователя

Страница: 7 / 10

Remove cover by snaping off from top or bot-
tom. Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready A23
/ GP 23A all 12V.Attach cover of remote by plac-
ing over buttons and snap the battery cover in
place.
62
Attach front cover to wall control
with screws provided. Snap battery
cover in place.
65
Place face plate over battery compartment and
buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over 4
pins and snaping into place.
63
HAND HELD INSTALL
Install wall control unit to outlet box
using machine screws provided.
64
WALL MOUNT INSTALL
Install capacitor into switch cap by
replacing screw saved.
55
Place the steel plate on the switch
cap. Next, place the finial plate then
place the finial cap then place the
crystal ball over. (As shown
above.)Install lockwasher and hex
nut provided and tighten securely.
(As shown above)
Loosen and remove the switch hous-
ing screws.
57
Place the switch cap over the switch
cap plate and replace the screws
removed from the previous step.
Tighten securely. Raise band cover
over notches (as shown above) and
twist to lock into place.
61
Install reverse module into switch
cap by replacing screw saved.
56
Plug connector from fan to connector
from switch housing.
60
Twist the cover band to expose the
screw holes aligning the notches as
shown above.
59
58