Monte Carlo Fan Company Crystoria, Руководство пользователя

Страница: 6 / 10

Remove lock rings and save.
49
Install glass to fitters and then install
the lock rings to hold glass in place.
50
Install 4 x 40 watt (E12) base
bulbs.(Bulbs not included)
51
Plug connector from fan to connector
from switch housing.
47
Remove and save the switch housing
screws.
45
Install lockwasher and hex nut pro-
vided and tighten securely.
44
NOTE: Skip to step 52 if you are
not installing the light kit. Place
the steel plate on the switchcap.Next,
place the finial plate first then place
the finial cap then place the crystal
ball over. (As shown above.)
Place the light kit over the switch cap
plate and replace the screws
removed from the previous
step.Tighten securely.Raise band
cover over notches (as shown
above)and twist to lock into place.
48
Remove capacitor from light kit by
removing the screw and saving it.
54
If you have installed the light kit
skip to step 60. Disconnect the
white to the white wire and the black
to the blue wire.
52
Remove reverse module from light
kit by removing the screw and saving
it.
53
Remove the cover band from the
switch cap. Place the cover band
over the light kit aligning the notches
as shown above.
46
43