© Copyright 1998, Monte Carlo Fan Co.,REV.0, 9/18/98
Page 4 – Designer Supreme-English CUL
Note:
After installation, please refer to operation, maintenance and troubleshooting sections in this manual.
If your fan is packaged with a light kit or if you wish to install a separately purchased light kit,
please refer to the insert sheet titled:
L
IGHT
K
IT
I
NSTALLATION
I
NSTALLATION
WIRING OPTION WITH WALL SPEED CONTROL
Wall
control
Light Switch
Fan Switch
8
For control of fan and optional light from
wall location, follow diagram above.
NOTE: A professional electrician is
recommended for this type of installation.
7
*
ATTACH BLUE WIRE
ONLY IF ATTACHING
LIGHT KIT WITH FAN
*
Secure with
twist-lock
wire
connectors
(included)
For pullchain controls, follow diagram above. Make
sure that all exposed wiring is secured inside wire
nuts. Note: Wires from house may vary in color and
may not include ground wire. After wiring is
conplete, gently push wires into junction box
with wire nuts pointing upward. Refer to point
3 of safety tips.
STANDARD WIRING OPTION
9
Raise the canopy up and align the two
holes in the canopy with the two holes in
the hanger bracket. Secure with two 5/
32 x 1/2" screws provided.
C
OMBO
-B
LADE
10
Combo-Blades feature two high quality
finishes on one blade. Select the one that
best complements your decor, or change
the style with just a flip of the blade.
11
Fiber
Washers
Attach blade brackets to blades using
the blade bracket screws and washers
provided.
12
13
Remove plastic shipping stabilizer tabs,if
present.The screws,washers and motor pads are
pre-installed to the blade holders.Attach blade
assembly to motor by tightening first screw
one turn,then tighten second screw
securely.Then,go back and tighten first
screw securely.
Shipping
Stabilizer
Tab
14
After attaching blade; reinstall the
switch housing using the three screws
previously removed.
To gain access to the blade bracket
attachment holes remove the switch
housing cover by unscrewing the three
screws. Gently slide the cover off .
