ETL model no. :5VBR60
Install the hex nut removed ear-
lier over the lead wires and
tighten the hex nut onto thread-
ed pipe from the light fitter
securely.
27
Install the light fitter to the switch
cap.
26
Install the light kit assembly to the
fan with the screws removed previ-
ously and tighten the screws secure-
ly.
29
Remove the hex nut from the light
fitter and save for later use.
25
Install the switch cap onto fan with
the 3 screws removed previously and
tighten the 3 screws securely.
23
Remove 3 screws from the switch
cap cover, and save for use later.
22
Check the motor for shipping stabi-
lizers and remove if present. Attach
the blade assembly to the motor and
tighten securely.
19
Remove the finial, finial cap and nip-
ple from the switch cap, save for use
later.
24
For fan with
out light kit go
to step 23.
For fan with
light kit go to
step 24-31.
Connect plug from fan to plug from
light fixture.
28
Loosen 2 screws and remove 1 screw
from motor plate and save.
20
Align keyslot holes of the switch
housing plate to the holes of the
motor plate and twist to lock. Add
the screw removed from step 20.
Tighten securely.
21
