Locate blue and white wire from the
fan marked “For light kit”. Connect
blue from fan to black from light and
white from fan to white from light by
pushing connectors together.
Attach switch cap to fan by lining up
3 screw holes and installing the 3
screws removed and saved from ear-
lier step. Tighten screws securely.
33
34
If not installing the light kit
skip to step 40.
Push wires
through center hole of the switch
cap.
30
Place pull chain from fan through
guide from light kit. Be sure they are
lined up vertically.
38
Loosen 3 screws on the ridge of the
light kit.
35
Attach fob with connector to extend
your pull chains.
39
Push glass up into fitter and hand
tighten the 3 screws to hold in place.
37
Install keeper nut from the threaded
pipe of the light kit.
Install the keeper nut from the lead
wires.
31
Remove 3 screws on the ridge of
the switch cap and save.
29
32
Place and press firmly on the capaci-
tor to stick it to the switch housing.
Be sure it is secure.
28
Install 2 x 13 watt (E27) based
fluorescent bulbs.(Bulbs Included)
36
