Attach front cover to wall control
with screws provided. Snap battery
cover in place.
39
Install wall control unit to outlet box
using machine screws provided.
38
WALL MOUNT INSTALL
Remove battery cover. Install 12V battery into
wall remote. Duracell MN21 / Eveready A23 /
GP 23A all 12V.Attach cover of remote by plac-
ing over buttons and snap the battery cover in
place.
Place face plate over battery compartment and
buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over 4
pins and snapping into place.
37
36
HAND HELD INSTALL
Using wrench to remove the light
plate from the light fixture by
uninstalling the hex nut and lock
washer. Save the removed parts
for later use.
30
Place the thread rod provided in
hardware pack to the light plate
as shown.
31
Install the thread rod with the
light plate by the lock washer
and hex nut which were removed
from step 30.
32
Align keyslot holes of the light
plate and twist it to lock. Install
the screw removed in step 23.
Tighten all screws securely.
33
Attach the blanking plate to the
fan and secure it with the rubber
washer and hex nut. Refer to the
step 24 in getting the rubber
washer and hex nut.
34
Install the decorative finial nut
to the thread rod by screwing to
secure the blanking plate.
35
