Monte Carlo Fan Company 5DKR52XXD Series, Руководство пользователя и инструкция по установке

Страница: 3 / 10

3
© 2011 Monte Carlo Fan Company
11/25/2012
1 2 3
4 5 6
ON
OFF
ON
OFF
Before you begin installing the fan, Switch
power off at Service panel and lock
service disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be locked,
securely fasten a warning device, such
as a tag, to the service panel.
Before installing this fan make sure the
outlet box is properly installed to the
house structure. To reduce the risk of
fire, electric shock, or personal injury,
mount to outlet box or supporting system
acceptable for fan support.
(Mounting must support at least 35 lbs.)
Use metal outlet box suitable for fan
support and use only the screws provided
with the outlet box (must support 35
lbs). Before attaching fan to outlet box,
ensure the outlet box is securely fastened
by at least two points to a structural
ceiling member ( a loose box will cause
the fan to wobble). Remove the two outlet
box screws provided with the box,
aligning the holes of the mounting
bracket with the holes of the outlet box.
Reinstall the 2 outlet box screws
securely.
Partially loosen downrod set screws from
yoke at top of motor assembly.
Remove preassembled Keeper pin and
cross pin from downrod.
Note : Refer to installation step 22 about
reverse switch with airflow directions.
Place downrod over canopy, decorative
kit and yoke cover. Thread lead wires and
safety cable from motor assembly
through downrod.
Slip downrod into motor housing yoke,
aligning holes and install cross pin and
keeper pin.
Insert cross pin through yoke and downrod
until point appears on the other side, and
insert keeper pin on cross pin.
Pull the downrod up tight against the cross
pin, and then evenly tighten the downrod
set screws on motor housing yoke.
Place yoke cover and decorative kit on top
housing of fan.
Warning : Cross pin and keeper pin must
be installed securely, failure to install them
will result in serious injury.
Yoke cover
Canopy
Downrod
Mounting bracket
Downrod
Cross pin
Keeper pin
Decorative kit
Cross pin
Keeper pin
Reverse switch