Monte Carlo Fan Company 5DKR52XXD Series, Руководство пользователя и инструкция по установке

Страница: 6 / 10

6
© 2011 Monte Carlo Fan Company
11/25/2012
19 20 21
22 23 24
Install 2 x 13W CFL medium base bulbs.
Bulbs included.
WARNING:
USE MAXIMUM 13 WATTS
MEDIUM BASE LISTED
SBCFL(SELF-BALLASTED COMPACT
FLUORESCENT LAMP) ONLY, NOT DOING
SO COULD CAUSE THE UNIT TO
OVERHEAT AND LEAD TO POSSIBLE
DAMAGE TO THE PRODUCT.
Caution
: Do not replace bulb until it
cools down.
Remove rubber washer, hex nut and finial
from light fixture. Save parts.
Attach glass onto light fixture. Install the
rubber washer, hex nut and finial removed
in step 20 to the thread rod by screwing
to secure the glass. Do not over tighten
the hex nut and finial.
Setting the reverse switch in the left hand
side will result in downward airflow and
setting the switch in the right hand side
will result in upward airflow.
Note : Reverse switch must be set either
completely Left or completely Right for
fan to function. If the reverse switch is set
in the middle position, fan will not
operate.
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 /
Evereday A23 / GP 23A all 12V. Attach
cover of remote by placing over buttons
and snap the battery cover in place.
Place battery cover over battery
compartment and buttons. Place remote
over 2 pins on front cover. Attach cover
of remote by placing over 4 pins and
snapping into place.
Hex nut
Hex nut
Finial
Finial
Glass
Battery cover
Battery
HAND HELD INSTALL
Right hand
side
(Reverse)
Left hand
side
(Forward)
Reverse switch
Rubber
washer
Rubber washer