Monte Carlo Fan Company 5CQM52XX-L Series, Руководство пользователя и инструкция по установке

Страница: 6 / 9

6
© 2015 Monte Carlo Fan Company
4/25/2015
Wiring
Warning:
Make sure main power is turned off before making
wiring.
Make wire connections as indicated. Connect Black and Blue
wire from fan to Black (Hot) wire from house. Connect White
wire from Fan to White (Neutral) wire from house. Connect all
green grounded wires from fan to Grounded wire from
House. Make sure that no filaments are outside of the wire
connectors. (Fig. 7)
For control of fan and light separately from wall location,
follow diagram as shown. (Fig. 7-1)
Note
: A professional electrician is recommended for this
type of installation.
Note
: Wrap each wire connector separately with electrical
tape as an extra safety measure.
Canopy Installation
Partially loosen 2 of the set screws on mounting bracket
corresponding to the slotted holes on the canopy upper ring.
Remove the other 2 set screws. Save screws.
Raise canopy to mounting bracket, aligning loosened screws
in mounting bracket with slotted holes in canopy. Twist
canopy to lock. Reinstall screws (with washers) that were
previously removed and then tighten all screw securely.
Lift the canopy ring up, aligning notch on canopy with the
raise areas inside of canopy ring and pop it onto the canopy.
(Fig. 8, Fig. 8-1)
Power supply
Black
white G
rounding/G
reen
Fan
Light
Blue Black
W
all cont
roller
Wiring Option with Wall Controller
Fig. 7
Fig. 7-1
Fig. 8
Mounting bracket
Mounting bracket
Fig. 8-1
Wall Switch
White
White
Black
Black
Power
Line
Blue
Grounded/
Green
Canopy
Set screws
Canopy
Set screws
Canopy cover
Downrod mount
Flush mount
Canopy ring
Notch
Canopy ring