© 2013 Monte Carlo Fan Company
6/15/2013
4
Make wire connections to power source using wire nuts
provided. Make sure that no filiments are outside of
the wirenut. After making the wire connections, the
wires should be spread apart with the grounded con-
ductor and the equipment-grounding conductor on one
side of the outlet box and ungrounded conductor on the
other side of the outlet box.
12
Make sure the studs protruding from
the bottom of the Mounting bracket
are installed with threads all the way
through the bracket.
10
Pass leadwires and safety cable
through the canopy.
Remove side covers from canopy ex-
posing 4 holes. 2 closed holes and 2
open “L” shape holes.
17
18
Lift Canopy allowing the 2 studs
to protrude through the canopy.
13
Next lift the canopy disk and install
knurled nuts as shown. Tighten the
knurled nuts securely. The canopy should
adjust for any irregularity in the ceiling or
Outlet box.
14
Connect black and blue wire from fan to Black or (Hot)
wire from house. Connect White wire from Fan to White
(Neutral) wire from house. Connect Ground leads from
mounting bracket and downrod to Ground lead from
house.
Refer to Safety Tips section of manual.
11
Canopy disk
House
Fan
Blue
Black
White
Green
Black
White
Ground
Install rubber pad between fan
body and canopy.
16
Remove every other screw as circled
and save for later use.
15
Flush Mount Installation
