Monte Carlo Fan Company 3TAHR56 D Series, Руководство пользователя и инструкция по установке

Страница: 5 / 10

5
© 2018 Monte Carlo Fan Company
12/2018
13 14 15
16 17 18
Insert blade into the slot on flywheel.
Install blade with a blade supporting plate
by the screws and washers provided,
aligning each of the holes as shown and
tighten all screws securely. Repeat this
process for remaining blades.
Place the lead wires from fan over the
central hole of light pan
Aligning the keyhole slots on the light pan
with the preassembled screws on the
plate. Twist clockwise till lock. Reinstall
the screw removed in installation step 14.
Tighten all screws securely.
Loosen 2 and remove 1 preassembled
screw from light pan. Save screw for later
use.
Connect white wire from fan to white wire from
LED light fixture and then connect blue (or
black) wire from fan to black (or blue) wire
from LED light fixture. Be sure plugs
connection clasped together completely.
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on the
light pan. Twist clockwise till lock. Reinstall the
screw removed in installation step 16. Tighten
all screws securely.
Note
: If you don’t want to install the fan with
LED light, go to step 19 for blanking plate
installation.
Only apply to the items
with blanking plate.
Attach glass assembly by locating
dimples in light pan with grooves on the
glass assembly and twist clockwise until
tight.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Plate on motor
Glass assembly
Light pan
LED light fixture
White
Blue
Black
Install LED Light Fixture
Blade supporting plate