background image

3

1

2

3

4

5

6

© 2021 Monte Carlo Fan Collections

8/2021

ON

OFF

ON

OFF

Before you begin installing the fan, Switch 

power off at Service panel and lock 

service disconnecting means to prevent 

power from being switched on 

accidentally. When the service 

disconnecting means cannot be locked, 

securely fasten a warning device, such  

as a tag, to the service panel.

Use AC 120V/60HZ power supply 

only.

Before installing this fan make sure the 

outlet box is properly installed to the 

house structure. To reduce the risk of 

fire, electric shock, or personal injury, 

mount to outlet box or supporting system 

acceptable for fan support. 

(Mounting must support at least 35 lbs.)

Install the mounting bracket onto the 

outlet box.

Partially loosen the two screws on the 

outlet box, attach the mounting bracket 

onto the outlet box by sliding it over the 

two screws as shown in the illustration. 

Have the mounting bracket in position 

and tighten the set screws.  

Partially loosen downrod set screws from 

yoke at top of motor assembly.

Remove preassembled keeper pin and 

cross pin from downrod. Keep parts 

Place downrod over canopy, decorative 

cap and yoke cover. Thread lead wires 

and safety cable from motor assembly 

through downrod.

Note

If the fan to be installed on a 

slope ceiling, the decorative cap 

shouldn’t be installed corresponding 

to the installation step 8. 

Yoke cover

Downrod

Cross pin

Keeper pin

Mounting bracket

Canopy

Use metal outlet box suitable for fan 

support and use only the screws provided 

with the outlet box  (must support 35 

lbs). Before attaching fan to outlet box, 

ensure the outlet box is securely fastened 

by at least two points to a structural 

ceiling member ( a loose box will cause 

the fan to wobble). 

Decorative cap

Yoke

Содержание 3STMSM60 Series












Отзывы: