![Montarbo LM 260 Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/montarbo/lm-260/lm-260_owners-manual_1829638014.webp)
Owner’s manual
|
LM 260
Loudspeaker Management Processor
14
LM 260
LOUDSPEAKER MANAGEMENT PROCESSOR
The central column shows following sections:
PRESETS LOCAL
with
Store
and
Load boxes
.
These boxes are related to your computer memory, allowing you to store to and to load from the folder:
Programs
>
AllControl
>
presets.
PRESETS UNIT
The top box shows the name of currently active preset. The middle box shows the list of 50 available “0” preset called
Last Setting
, i. e. the parameters of the preset as currently edited.
Finally we have the
Store
and
Load boxes
.
Pressing
Load
the computer synchronizes with your unit, this operation is shown in a box with a green progress line.
Pressing
Store
the changes done (and momentarily kept in “0” preset called Last Setting) are stored in unit internal memory.
LINK
Feature one lit box and one box for unit choice.
If the unit is turned off you will be warned by a text box showing “
No units found. The software will start in demo mode.
”
In this case the light will be red, and the software will work in “
LM260 (Demo)
” mode. Turning on your unit, you can chose
the way of working between “
LM260 (Demo)
” mode and “
FIVEO LM260 (USB port#)
”
UNIT NAME
Shows the name of currently active unit.
ALLCONTROL DSP COMMAND CENTRE
Shows input and output sliders, with active text boxes. These text boxes show the level settings, and can be used to do fine
adjustments. Under the active text boxes there are LINK locks to link odd (which has priority) and even pairs, and MUTE switches.
6.4 X-OVER
The main screen shows frequency response from 10Hz up to 20kHz, and dynamic range from +10dB up to -50dB. On the right
there are 6 OUTPUT LEVEL indicators, and MUTE and PHASE INVERT switches.