LM 260
Loudspeaker Management Processor |
Owner’s manual
11
LM 260
LOUDSPEAKER MANAGEMENT PROCESSOR
Pressing again the DIAL, you can chose each parametric equalizer Q factor:
Out 1 PEQ 10 Q: 1.00
Values are adjustable in 0.20-25.00 range, with 0.10 Q steps.
Pressing again the DIAL, you can chose each parametric equalizer type:
Out 1 PEQ 10 Type: Bell
You can chose EQ type among: Bell; Notch; High Shelf; Low Shelf and Allpass.
Finally, pressing NEXT you can enable/disable each PEQ band, the screen will show:
Out 1 PEQ 10 Enabled: On
Values are Off or On.
Pressing NEXT you recall the
HighPass crossover
screen, the display will show, for example:
Out 1 HighPass Freq: Off
The HighPass to Off or tuned 20Hz-20000Hz range, with 1Hz step.
Pressing the DIAL you can chose HighPass filter type among the following options:
LR 24dB
BES 24dB
BUT 24dB
BES 18dB
BUT 18dB
LR 12dB
BES 12dB
BUT 12dB
BES 6dB
BUT 6dB
Please note: LR = Linkwitz-Riley BES = Bessel BUT = Butterworth.
Pressing NEXT you recall the
LowPass crossover
screen, the display will show, for example:
Out 1 LowPass Freq: Off
The HighPass to Off or tuned 20000Hz-20Hz range, with 1Hz step.
Pressing the DIAL you can chose LowPass filter type among the following options:
LR 24dB
BES 24dB
BUT 24dB
BES 18dB
BUT 18dB
LR 12dB
BES 12dB
BUT 12dB
BES 6dB
BUT 6dB
Please note: LR = Linkwitz-Riley BES = Bessel BUT = Butterworth.
