Owner’s manual
|
LM 260
Loudspeaker Management Processor
10
LM 260
LOUDSPEAKER MANAGEMENT PROCESSOR
5. PRESET EDITING
After loading the needed preset, you can edit the values pressing NEXT.
First value to be adjusted is INPUT GAIN.
The display will show:
In 1 Gain
3.00dB
The value range is from -50.00dB up to +12.00dB, in 0.25dB steps
Pressing NEXT again the display will show:
In 1 Link: Off
Values are On and Off. Pressing PAGE you can recall In 2, which has the same two NEXT/PREV screens.
Pressing PAGE again you can recall all the outputs.
For details about outputs signal, please check
4.4 ROUTING
(page 8).
Pressing NEXT you recall the OUTPUT GAIN screens and the display will show, for example:
Out 1 Gain
0dB
The value range is from -50.00dB up to +12.00dB, in 0.25dB steps
Out 1 Link: Off
Values are On and Off. Pressing NEXT you recall the LINK screen The display will, for example, show:
Out 1 Link: Off
Values are Off or On. Pressing NEXT you recall the PHASE screen. The display will, for example, show:
Out 1 Phase: Normal
Values are Normal or Inverted. Pressing NEXT you recall the LIMITER screen, the first display will show THRESHOLD setting,
for example:
Out 1 Limiter: Thr.: 0dBu
Range is from -30.00dBu up to +9.00dBu, in 0.25dBu steps.
Pressing NEXT you recall the PEQ screens, one for each 10 Output parametric equalizers.
The display will, for example, show:
Out 1 PEQ 10 Freq: 10240Hz
Each parametric EQ band can be set in 20Hz-20000Hz range, with 1Hz step.
Pressing again the DIAL, you can chose each parametric equalizer gain:
Out 1 PEQ 10 Gain: 0dB
Range is from -12.00dB up to +12.00dB, in 0.25dB steps.
