63
5.3.1 - Building the speaker's list
Each speaker system in the Montarbo's FULL, SPOT, WIDE and 'E' series has,
permanently written in the internal DSP's software, a unique ID (name) in
the hexadecimal format 'Hxxxxxxxxxxxxxxx', that will distinguish it from
all the others (a digital 'serial number').
To start building the speaker's list, click on the StartAW button (top left).
A small window will open to ask for a confirmation.
Click OK
if you really want to build a new list, otherwise click
Cancel.
After clicking OK
, the program's windows will be empty.
To register a speaker in the list, push both the rear panel
UP
and
DOWN
buttons
at the same time (see fig. 'DSP controls' page 42).
Repeat this operation for all the networked speakers,
one at a time.
The speakers will send their ID to the program, which will register them in
the list and will display their ID in the upper left window.
When done with the last networked speaker, click on
StopAW to end the
process.
The program has now built a speaker's list and the display will look like
the following screen.
NOTE: the maximum number of speakers that may be controlled by the
RAConLS program is 10.
ENGLISH
Содержание E616A
Страница 1: ...1 2 way active loudspeaker systems Manuale istruzioni Instruction manual SERIES...
Страница 71: ...71 ENGLISH...
