Reference 09Aug2014 – V16
Pg
12 of 12
Copyright 2002-2014, Monster Tower, Inc.
Monster Tower, Inc. - 5 Year Warranty
- Monster Tower warrants that for a period of 5 years from the date the tower is sold at
retail, that Monster Tower will repair directly, or supply parts for the repair of any material cracks, fractures or structural failures that
are a result of a manufacturing defect. Anodizing and powder coated surfaces as well as all hardware corrosion are specifically
excluded as their care and use cannot be controlled by Monster Tower. Any modifications or improper use, not approved in writing
by Monster Tower, shall void this warranty. Monster Tower is not responsible for personal injury or damage to the boat or other
items caused by the use of this tower. Monster Tower’s obligation under this warranty shall not include any transportation charges
or costs of installation or any liability for direct, indirect or consequential damages resulting from delay or improper installation of the
tower. Instead of reading all this fine print, get your tower on the boat and go ride! No dealer, retailer or manufacturer is the agent
of Monster Tower and may not assume for Monster Tower any liability in connection with this warranty. This warranty is in lieu of all
other warranties, expressed or implied, including any warranty of merchantability or of fitness for a particular purpose. If you need to
make a warranty claim contact Monster Tower at 877-77-Tower to receive a return authorization number which is required for all
claims. Defects must be reported within 30 days of receipt.
APPENDIX A -
Wiring Instructions for your Monster Tower
If you add speakers or lights to your Monster Tower, you can hide the wires inside of the rear legs of the
tower as well as in the straight cross member of the top section. Since the mating parts insert ½” inside
each end of the rear leg you can drill 1” away from the weld lines. For the top section cross member you
will need to place the hole 3” from the weld line to clear the rotating collar assembly. The hole size will
depend on what size wire you are running and how many items you need to wire. The maximum hole
size we recommend is ½” but normally smaller is all that is needed.
½”
1”
ADDITIONAL RESOURCES OF INTEREST
The various connectors, finishing grommets and items you will need for wiring lights and speakers can be
found at Radio Shack, Home Depot, Lowe’s, Ace and other hardware stores. You can also find much of
this at
www.WayTekWire.com
as well as many other online sources. There are some great technical
documents at
www.installdr.com
that may be of assistance as well. If you are interested in making your
own speakers or other items for your tower, check out
www.diyTower.com
.
Monster Tower Accessories
Monster Tower also offers Quick Release Wakeboard, Waterski and Surfboard Racks: Mirrors, Speakers
and Lights to fit your tower.
Wakeboard Racks
Tower Speakers
Light Bars
Tower Mirrors
