STEP 5
With everything installed, return your first segment to the wall by
centering it over the mounting bracket so it snaps into place.
NOTE:
Ensure the directional marker
is pointing in the desired direction for
your pattern.
NOTE:
Ensure the
GREEN
connectors are always pointing
AWAY from the controller.
STEP 6
Build out your Digit pattern by repeating these steps with more
segments and cables, moving away from the controller.
NOTE:
For flush corners in square designs, use the
outside ports. See the
Design Guide
for details.
STEPS:
A. Peel off the adhesive backing on a new segment.
B. Place the new segment on the wall less than
3 inches away from the last segment.
C. Remove the segment and press
firmly on the bracket for 10 seconds.
D. Attach more connectors using the
RED
side, then attach the open
GREEN
plug from the last segment.
E. Replace the segment over the
mounting bracket and make sure
all connections are secure.
6
7
