NOTES
This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
To satisfy FCC’s RF exposure requirements, a separation distance of 20 cm or more should be maintained between
the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this
distance is not recommended.
This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and
compliance. The minimum distance from body to use the device is 20cm.
Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,
les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les
informations correspondantes. La distance minimale du corps à utiliser le dispositif est de 20cm.
Jem Accessories, Inc. Limited Warranty Policy for Monster Smart Products Last Updated: March 27, 2020
This limited warranty contains important information about your rights and obligations, as well as limitations and
exclusions that may apply to you.
1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE Jem Accessories, Inc. (“Jem Accessories”), 32
Brunswick Ave, Edison, New Jersey, USA, warrants to the owner of the enclosed Monster Smart-branded product
contained in this box (“Product”) will be free from defects in materials and workmanship for a period of one year.
Notwithstanding the foregoing, the Warranty Period for a factory refurbished Product is one (1) year, even if installed
by a professional. If the Product fails to conform to this Limited Warranty during the Warranty Period, Jem Accessories
will, at its sole discretion, either (a) repair or replace any defective Product or component; with proof of purchase using
original documentation. Repair or replacement may be made with a new or refurbished product or components, at
Jem Accessories’s sole discretion. If the Product or a component incorporated within it is no longer available, Jem
Accessories may, at Jem Accessories’s sole discretion, replace the Product with a similar product of similar function.
This is your sole and exclusive remedy for breach of this Limited Warranty. Any Product that has either been repaired or
replaced under this Limited Warranty will be covered by the terms of this Limited Warranty for the longer of (a) ninety
(90) days from the date of delivery of the repaired Product or replacement Product, or (b) the remaining Warranty
Period. This Limited Warranty is not transferable from the original purchaser to subsequent owners.
2. TOTAL SATISFACTION RETURN POLICY If you are the original purchaser of the Product and you are not
1 YEAR LIMITED WARRANTY
FCC Compliance
ISEDC Warning
The illustrated products and specifications may differ slightly from those supplied.
The M Monster logo and IlluminEssence are trademarks or registered trademarks of Monster,
Inc. or its subsidiaries in the U.S. and other countries and are used under license. Apple and the
Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App store is
a service mark of Apple Inc. Google and Google Play are trademarks of Google LLC.
Pre-set-up required. Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc.
or its affiliates. All other brand names are trademarks of their respective owners. Neither Jem
Accessories, Inc. nor Monster, Inc. is affiliated with the respective owners of their trademarks.
Licensed and Manufactured by Jem Accessories, Inc. Edison, NJ 08817. Made in China.
WARRANTY
1 Year Limited Warranty
- Please read and understand all
instructions before using this product. If damage is caused by
failure to follow the instructions, this warranty is null and void.
SAFETY
• Keep these instructions
• Do not drop, puncture, or disassemble this product
• Do not install this product in any way other than what is
outlined in this guide
• Do not attach this product to the ceiling or to the floor
• Do not install this product on unpainted brick, uneven/
bumpy surfaces, or wallpaper
• Do not use this product in wet or very humid environments
or expose to dripping or splashing liquids of any kind
• Do not immerse in water
• Avoid long exposure to direct sunlight, which may cause damage
• Do not use this product in small, enclosed locations that
could limit the flow of air or trap excess heat
• Do not expose this product to open flames
• Do not use the product in a strong magnetic field
• Do not use this product for emergency lighting/exits
• Do not allow small children to operate, modify, or install
this device unsupervised
• Use a clean, soft cloth to clean - do not use any corrosive
cleaners/oils to clean
• For indoor use only
PATENT PENDING
Powered by
DIGIT | Model: MLB7-1035-RGB | Input: 12VDC 3A
FCC ID: 2AHAS-MLB71035 | IC: 26069-MLB71035 | HVIN: MLB7-1035-RGB
14
15
