Monsher MHE 6012, Руководство пользователя

Страница: 47 / 108

47 47
English
Before using your New Hob
• Read this guide, taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your new electric hob.
Using the Touch Controls
• The controls respond to touch, so you don’t need to apply any pressure.
• Use the ball of your finger, not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean, dry,
and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make the
controls difficult to operate.
Choose the right Cookware
;
Only use cookware with a base suitable for induction cooking. Look for the
induction symbol on the packaging or on the bottom
of the pan.
; You can check whether your cookware is suitable by
carrying out a magnet test. Move a magnet towards
the base of the pan. If it is attracted, the pan is
suitable for induction hob.
;
If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and water is heating, the pan is suitable.
;
Cookware made from the following materials is not suitable for an induction
hob: pure stainless steel, aluminum or copper without a magnetic base, glass,
wood, porcelain, ceramic, and earthenware.
; Induction hob are made from smooth, ceramic glass, the heat comes from a
magnetic induction coil which heats the cookware but not the cooking surface.
The heat from the cookware is transferred to the food.
;
It’s important that you use only metal pans specifically designed and/or
approved for use on induction hobs. Never allow melamine or plastic containers
to come in contact with the heat zones.
;
A pan which diameter less than 140mm may not be detected by the induction
hob.